uPVC door lock repairs and replacements
Door will not lock, handle gone floppy, or key will not turn? A local locksmith can repair the mechanism, usually without replacing the door.
- Open 24 hours, 7 days a week
- Price agreed before work starts
- Non-destructive entry tried first
- Insured, ID-checked locksmiths
What happens when you call
We put you straight through to an available locksmith near you. They tell you the price and how long they will be before you agree to anything. You pay the locksmith directly when the job is done, by card or cash.

Common uPVC door problems
- The door will not lock when you lift the handle.
- The handle is floppy or does not spring back.
- The key will not turn, or turns only with force.
- The door is stuck locked and will not open at all.
- The door drags or will not close because it has dropped on its hinges.
How a uPVC lock works
Most uPVC and composite doors use a multi-point lock. When you lift the handle, hooks, rollers or bolts engage at several points down the edge of the door. Turning the key then locks them all in place. The parts that wear out are usually the gearbox in the middle, the cylinder and the handle springs.
Repair first, replace if needed
A locksmith will usually start by adjusting the door and keeps so everything lines up again. If a part has failed, they can replace the gearbox, the full mechanism, the cylinder or the handles. Replacing the whole door is very rarely needed.
Do not force it
If the handle is stiff, do not push harder or use a lever. Forcing a failing mechanism is the most common way to end up locked out. Call as soon as you notice a problem.
Three steps from locked out to back inside
Call us
Tell us where you are and what has happened. The line is open day and night.
Get a price and arrival time
We connect you to an available local locksmith, who tells you the cost and how soon they can be there.
Back in, door secure
The locksmith gets you in, fixes or replaces the lock if needed, and you pay them directly.
uPVC door playing up?
Call now and a local locksmith will tell you what it needs and what it will cost.
Frequently asked questions
Why will my uPVC door not lock?
The most common causes are a worn gearbox, a failed multi-point mechanism, or a door that has dropped so the hooks no longer line up with the keeps. A locksmith can usually diagnose it quickly.
My uPVC door handle has gone floppy. What does that mean?
A floppy handle usually means a broken spring in the handle or a failed gearbox inside the door. It is worth fixing early, as it can fail with the door locked.
Can you open a uPVC door that is stuck locked?
Yes. Locksmiths have techniques to open uPVC doors with failed mechanisms, usually without damaging the door or frame.
Do I need a new door?
Rarely. Most problems are fixed by replacing the gearbox, the mechanism, the cylinder or the handles, or by adjusting the hinges and keeps.
Do you repair composite doors too?
Yes. Composite doors use the same type of multi-point locks as uPVC doors, so the repairs are very similar.